Canon CR-N500 PTZ-image

Canon CR-N500 PTZ 

  • Prod­uct Details 
  • Addi­tion­al Information 

Canon CR-N500 PTZ

The CR-N500 is a dynam­ic PTZ cam­era for pro­duc­tion and video stream­ing. It fea­tures a 1.0‑inch type 4K UHD sen­sor with Dual Pix­el CMOS AF, 15x opti­cal zoom, smooth pan and tilt, and image sta­bi­liza­tion – for cap­tur­ing con­tent with pre­mi­um detail.

Ben­e­fit from our attrac­tive prices and cus­tomised offers for event technology.

Key features:

  • Image sen­sor: 1″ type sin­gle lay­er CMOS sensor.
  • Effec­tive pix­els: approx. 8.29MP (3,840 x 2,160)
  • Lens: f=8.3 – 124.5mm, F2.8 – 4.5, 15x opti­cal zoom, 9‑blade iris diaphragm.
  • Zoom (opti­cal): 20x
  • Focal length: Hor­i­zon­tal: 73.0 (W) – 5.7° (T), Ver­ti­cal: 45.2° (W) – 3.2° (T)
  • Min­i­mum illu­mi­na­tion: 3,840 x 2,160: approx.1.5 lux (expo­sure time 1/​30 sec., frame rate 29.97p, gain 33.0 dB) – 1,920 x 1,080: approx. 3 lux (expo­sure time 1/​60 sec., frame rate 59.94p, gain 33.0 dB).
  • Shut­ter speeds: 1/​3 – 1/2,000 sec. (spe­cif­ic val­ues depend on frame rate and frame rate).
  • Iris: Manual/​Automatic iris
  • Sig­nal gain: ‑6.0 db ~ 33.0 db
  • ND-Fil­ter: Inte­gri­ert (Aus, 1/​4, 1/​16, 1/​64), motorbetrieben.
  • White bal­ance: AUTO (AWB), Set A, Set B, Pre­sets (Day­light: 5,600 K*, Tung­sten: 3,200 K*). Col­or tem­per­a­ture set­ting (2,000 K – 15,000 K), Man­u­al.
    (* The spec­i­fied col­or tem­per­a­tures are for ref­er­ence pur­pos­es only).
  • Focus: Man­u­al, AF-assist­ed MF, Con­tin­u­ous AF, Face AF, AF track­ing, AF type: Dual Pix­el CMOS AF, Con­trast AF.
  • Gam­ma: Normal1 (Stan­dard), Normal2 (x4.0), Normal3 (BT.709), Normal4 (x5.0), Wide DR, Canon Log 3
  • Pan & Tilt: Pan range: Hor­i­zon­tal ±170°, Pan speed: 0.1 – 100°/sec, Tilt range: Ver­ti­cal ‑30 – +90°, Tilt speed: 0.1 – 100°/sec.
  • Pan/​Tilt oper­a­tion (pro­to­col): Pro­to­col: XC (orig­i­nal from Canon), RTSP/​RTP, NDI|HX, RTMP/​RTMPS, stan­dard com­mu­ni­ca­tion (ser­i­al), stan­dard com­mu­ni­ca­tion (IP).

  • Video out­put for­mat (SDI):
  • 1.920 x 1.080: 59,94p/59,94i, 50,00p/50,00i/25,00p, 29,97p/23,98p (4:2:2 10 Bit),
    1.280 x 720: 59,94p, 50,00p (4:2:2 10 Bit).
    The same video for­mat is required for SDI and HDMI (No dif­fer­ent choice of for­mats for SDI and HDMI).
    If 3,840 x 2,160 is select­ed for HDMI, the video is not out­put to SDI.

 

  • Video out­put for­mat (HDMI):
    3.840 x 2.160: 29,97p, 25,00p, 23,98Pp (4:2:2 10 Bit),
    1.920 x 1.080: 59,94p/59,94i, 50,00p/50,00i/25,00p, 29,97p/23,98p (4:2:2 10 Bit),
    1.280 x 720: 59,94p, 50,00p (4:2:2 10 Bit).
    The same video for­mat is required for SDI and HDMI (No dif­fer­ent choice of for­mats for SDI and HDMI).
    If 3,840 x 2,160 is select­ed for HDMI, the video is not out­put to SDI.

 

  • Video-Out­put for­mat (IP):
    3.840 x 2.160: 29,97 B/​s, 14,99 B/​s, 5,00 B/​s (4:2:0 8 Bit),
    1.920 x 1.080: 59,94 B/​s, 29,97 B/​s, 14,99 B/​s, 5,00 B/​s (4:2:0 8 Bit),
    1.280 x 720: 59,94 B/​s, 29,97 B/​s, 14,99 B/​s, 5,00 B/​s (4:2:0 8 Bit),
    640 x 360: 59,94 B/​s, 29,97 B/​s, 14,99 B/​s, 5,00 B/​s (4:2:0 8 Bit).
    When 59.94÷50.00 Hz is select­ed as the frame rate, the 3,840 x 2,160 for­mat can­not be select­ed. A frame rate that exceeds the frame rate can­not be select­ed. JPEG has a fixed pat­tern that depends on the frame rate (the for­mat is fixed and can­not be select­ed). Res­o­lu­tion: 1,280 x 720. At frame rate 59.94÷50.00 Hz: 14.99 fps, at frame rate 23.98 Hz: 11.99 fps, at frame rate 29.97÷25.00 Hz: 12.50 fps.

  • SDI OUT con­nec­tor:
    BNC female (out­put only) x 1, 0.8 Vp‑p/​75 Ω, unbal­anced,
    SMPTE 424, SMPTE 425, SMPTE ST 299–2 com­pli­ant.
    Embed­ded audio, time code (VITC/​LTC).

 

  • GEN-LOCK inter­face: BNC female x 1, 1.0 Vp‑p/​75 Ω, input only.
  • HDMI OUT inter­face: HDMI inter­face x 1, out­put only.
  • RS-422 inter­face: RJ45 inter­face x 1

 

  • INPUT 1/​INPUT 2 inter­face:
    XLR/​audio input (3‑pin jack) (Pin 1: Ground, Pin 2: Sig­nal +,
    Pin 3: Sig­nal -), 2 sets, bal­anced.
    Sen­si­tiv­i­ty (MIC): ‑60 dBu (man­u­al vol­ume cen­ter,
    Full scale ‑18 dB)/600 Ω/​Att.: 20 dB.
    Sen­si­tiv­i­ty (LINE): +4 dBu (man­u­al vol­ume cen­ter,
    full scale ‑18 dB)/1 kΩ or more.
    Sup­ply volt­age: 48 V DC (bias resis­tor: 6.8 kΩ).

  • Net­zw­erkan­schluss: LAN x 1, RJ45, 1000Base‑T
  • Vor­e­in­stel­lung: Anzahl der Vor­e­in­stel­lun­gen: Max. 100 (ein­schließlich Grundstellung).
  • Kom­mu­nika­tion­ss­teuerung: LAN, WLAN, Seriell, IR
  • MIC-Anschluss: Type‑A (USB 2.0) x 1 (zukün­ftige Erweiterung).
  • Stromver­sorgung:
    PoE: PoE+ Stromver­sorgung über LAN-Anschluss (IEEE802.3at kom­pat­i­bel).
    PoE kann nicht ver­wen­det wer­den.
    Externe Stromquelle: 24 V DC (unter Ver­wen­dung des mit­geliefer­ten AC-Adapters).
  • Bau­größe (Bre­ite x Höhe x Tiefe):
    ca. 200 x 269 x 208 mm (ohne über­ste­hende Teile).
  • Gewicht: ca. 4,1 kg (nur Gehäuse).

Category:  Cam­era technique