BSS FCS-966 2x 30 Band Graphic EQ The BSS Audio FCS-966 is a two-channel third-octave equalizer with constant-Q filters. Each channel has an adjustable high-pass filter, separate hi- and lo-contour controls and an eight-digit level display (+ clip). The control range of the 45 mm faders is +/-15 dB. In the middle position, the signal path is bypassed. A hardwire bypass, balanced jack, XLR and barrier strip connections are included as standard. Event Rental Services. Professional sound & lighting and AV solutions for media productions.

Neutrik NA2-IO-DLINE Connecting analog audio equipment to the Dante® world: The NA2-IO-DLINE interface is an "end-of-network" device and a breakout box that can be used to feed two audio channels into a Dante network. At the same time, the interface converts Dante® signals into analog audio signals. This handy device can therefore be used to feed analog audio signals into a Dante® network and simultaneously receive analog audio signals from a Dante® source. The DanteTM adapter is a network end device that is also capable of converting a DanteTM signal into an analog audio signal. The "Mixed Mode" allows analog audio signals to be fed into the DanteTM network and a signal from another DanteTM source to be converted into an analog audio signal at the same time. The DanteTM adapter is ideally suited to the harsh conditions on stage, which is why it has lockable connections for audio and network connections. Event Rental Services. Professional sound & lighting and AV solutions for media productions. ▸ View operating instructions in PDF.

Minilyzer ML1 - Simple. Efficient. Fast. The Minilyzer is a powerful and handy audio measuring device that can reliably measure sound levels. With its range of functions, it significantly simplifies the commissioning and maintenance of audio systems. The ML1 has user-friendly menus, an automatic range setting and shows meaningful measurement results on a display. Event Rental Services. Professional sound & lighting and AV solutions for media productions. Measuring functions Level Input level (effective value) in volts, dBu or dBV, as well as signal frequency. Relative measurements to freely selectable references. With a measuring microphone, the ML1 also becomes a high-quality sound level meter (SPL/LEQ). THD+N Measurement of THD+N (THD with noise) and the second to fifth harmonic distortion as a dB value or in %. Display of fundamental frequency, input level and signal symmetry. Extensive filters. Frequency response The Minilyzer automatically recognizes the start of a sweep sequence with any step size and saves the measured frequency response. Graphical display with numerical cursor and zoom functions. Polarity Incorrectly connected loudspeakers are reliably detected with the ML1 and thebuilt-in microphone. The same measurement via the XLR input is ideal for cable polarity tests. Time sweep The time sweep records the course of the RMS level, the frequency and the THD+N value simultaneously and is very well suited for observing longer test periods as well as for detecting rarely occurring faults.   Oscilloscope The scope provides a quick overview of the waveform and immediately identifies overdriven amplifiers, noisy signals, etc. With automatic scaling and triggering as well as frequency display. 1/3rd Octave FFT based 1/3rd octave real-time analyzer. Automatic display of the most energetic band helps to eliminate feedback. Adjustable display time constant, zoom and data cursor. Electrical (dBu) and acoustic measurements (SPL scale) are supported. vu/PPM Precise level measurement for optimum electrical leveling according to IEC60268 (ppm = Peak Program Meter). All common standards are supported (Type I, Type IIA, Nordic); adjustable reference levels. Induction loop measurement AFILS The Minilyzer together with the optional MiniLINK USB interface measures induction loops AFILS according to standard IEC60118. A complete measurement menu can be activated in the Minilyzer according to the requirements of the standard, including calibration for a customer-specific field strength sensor.

Flyhana Inear Headset ME518 - USB-C Stereo headphones with multifunction button and 1.2 m cable with USB-C plug. If you need a pair of headphones you can rely on, this in-ear headset is just the thing for you. This practical and stylish headset is equipped with a 1.2 m cable and a convenient control button. Event Rental Services. Professional sound & lighting and AV solutions for media productions.