Canon CR-N500 PTZ

The CR-N500 is a dynamic PTZ camera for production and video streaming. It features a 1.0-inch type 4K UHD sensor with Dual Pixel CMOS AF, 15x optical zoom, smooth pan and tilt, and image stabilization - for capturing content with premium detail.

Benefit from our attractive prices and customised offers for event technology.

Key features:

Image sensor: 1" type single layer CMOS sensor.
Effective pixels: approx. 8.29MP (3,840 x 2,160)
Lens: f=8.3 - 124.5mm, F2.8 - 4.5, 15x optical zoom, 9-blade iris diaphragm.
Zoom (optical): 20x
Focal length: Horizontal: 73.0 (W) - 5.7° (T), Vertical: 45.2° (W) - 3.2° (T)
Minimum illumination: 3,840 x 2,160: approx.1.5 lux (exposure time 1/30 sec., frame rate 29.97p, gain 33.0 dB) -- 1,920 x 1,080: approx. 3 lux (exposure time 1/60 sec., frame rate 59.94p, gain 33.0 dB).
Shutter speeds: 1/3 - 1/2,000 sec. (specific values depend on frame rate and frame rate).
Iris: Manual/Automatic iris
Signal gain: -6.0 db ～ 33.0 db
ND-Filter: Integriert (Aus, 1/4, 1/16, 1/64), motorbetrieben.
White balance: AUTO (AWB), Set A, Set B, Presets (Daylight: 5,600 K*, Tungsten: 3,200 K*). Color temperature setting (2,000 K - 15,000 K), Manual.
(* The specified color temperatures are for reference purposes only).
Focus: Manual, AF-assisted MF, Continuous AF, Face AF, AF tracking, AF type: Dual Pixel CMOS AF, Contrast AF.
Gamma: Normal1 (Standard), Normal2 (x4.0), Normal3 (BT.709), Normal4 (x5.0), Wide DR, Canon Log 3
Pan & Tilt: Pan range: Horizontal ±170°, Pan speed: 0.1 - 100°/sec, Tilt range: Vertical -30 - +90°, Tilt speed: 0.1 - 100°/sec.
Pan/Tilt operation (protocol): Protocol: XC (original from Canon), RTSP/RTP, NDI|HX, RTMP/RTMPS, standard communication (serial), standard communication (IP).

Video output format (SDI):
1.920 x 1.080: 59,94p/59,94i, 50,00p/50,00i/25,00p, 29,97p/23,98p (4:2:2 10 Bit),
1.280 x 720: 59,94p, 50,00p (4:2:2 10 Bit).
The same video format is required for SDI and HDMI (No different choice of formats for SDI and HDMI).
If 3,840 x 2,160 is selected for HDMI, the video is not output to SDI.

Video output format (HDMI):
3.840 x 2.160: 29,97p, 25,00p, 23,98Pp (4:2:2 10 Bit),
1.920 x 1.080: 59,94p/59,94i, 50,00p/50,00i/25,00p, 29,97p/23,98p (4:2:2 10 Bit),
1.280 x 720: 59,94p, 50,00p (4:2:2 10 Bit).
The same video format is required for SDI and HDMI (No different choice of formats for SDI and HDMI).
If 3,840 x 2,160 is selected for HDMI, the video is not output to SDI.

Video-Output format (IP):
3.840 x 2.160: 29,97 B/s, 14,99 B/s, 5,00 B/s (4:2:0 8 Bit),
1.920 x 1.080: 59,94 B/s, 29,97 B/s, 14,99 B/s, 5,00 B/s (4:2:0 8 Bit),
1.280 x 720: 59,94 B/s, 29,97 B/s, 14,99 B/s, 5,00 B/s (4:2:0 8 Bit),
640 x 360: 59,94 B/s, 29,97 B/s, 14,99 B/s, 5,00 B/s (4:2:0 8 Bit).
When 59.94/50.00 Hz is selected as the frame rate, the 3,840 x 2,160 format cannot be selected. A frame rate that exceeds the frame rate cannot be selected. JPEG has a fixed pattern that depends on the frame rate (the format is fixed and cannot be selected). Resolution: 1,280 x 720. At frame rate 59.94/50.00 Hz: 14.99 fps, at frame rate 23.98 Hz: 11.99 fps, at frame rate 29.97/25.00 Hz: 12.50 fps.

SDI OUT connector:
BNC female (output only) x 1, 0.8 Vp-p/75 Ω, unbalanced,
SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant.
Embedded audio, time code (VITC/LTC).

GEN-LOCK interface: BNC female x 1, 1.0 Vp-p/75 Ω, input only.
HDMI OUT interface: HDMI interface x 1, output only.
RS-422 interface: RJ45 interface x 1

INPUT 1/INPUT 2 interface:
XLR/audio input (3-pin jack) (Pin 1: Ground, Pin 2: Signal +,
Pin 3: Signal -), 2 sets, balanced.
Sensitivity (MIC): -60 dBu (manual volume center,
Full scale -18 dB)/600 Ω/Att.: 20 dB.
Sensitivity (LINE): +4 dBu (manual volume center,
full scale -18 dB)/1 kΩ or more.
Supply voltage: 48 V DC (bias resistor: 6.8 kΩ).

Netzwerkanschluss: LAN x 1, RJ45, 1000Base-T
Voreinstellung: Anzahl der Voreinstellungen: Max. 100 (einschließlich Grundstellung).
Kommunikationssteuerung: LAN, WLAN, Seriell, IR
MIC-Anschluss: Type-A (USB 2.0) x 1 (zukünftige Erweiterung).
Stromversorgung:
PoE: PoE+ Stromversorgung über LAN-Anschluss (IEEE802.3at kompatibel).
PoE kann nicht verwendet werden.
Externe Stromquelle: 24 V DC (unter Verwendung des mitgelieferten AC-Adapters).
Baugröße (Breite x Höhe x Tiefe):
ca. 200 x 269 x 208 mm (ohne überstehende Teile).
Gewicht: ca. 4,1 kg (nur Gehäuse).